"Constrain a shape’s proportions or orientation to equal height and width for rectangles, rounded rectangles, ellipses, and grids", "Shift-drag" "Move a shape while drawing it", "spacebar-drag" "Draw from the center of a shape (except for polygons, stars, and flares)", "Option-drag" "Increase or decrease polygon sides, star points, arc angle, spiral winds, or flare rays", "Start dragging, then press the Up Arrow or Down Arrow" "Keep the inner radius of a star constant", "Start dragging, then hold down Command" "Keep the sides of a star straight", "Option-drag" "Switch between an open and closed arc", "Start dragging, then hold down C" "Flip an arc, keeping the reference point constant", "Start dragging, then hold down SF" "Add or subtract winds from a spiral while increasing the length of the spiral", "Start dragging then Option-drag" "Change the decay rate of a spiral", "Start dragging then Command-drag" "Add or remove horizontal lines from a rectangular grid or concentric lines from a polar grid", "Start dragging, then press the Up Arrow or Down Arrow" "Add or remove vertical lines from a rectangular grid or radial lines from a polar grid", "Start dragging, then press the Right Arrow or Left Arrow" "Decrease the skew value for horizontal dividers in a rectangular grid or radial dividers in a polar grid by 10%", "Start dragging, then press F" "Increase the skew value for horizontal dividers in a rectangular grid or radial dividers in a polar grid by 10%", "Start dragging, then press V" "Decrease the skew value for vertical dividers in a rectangular grid or concentric dividers in a polar grid by 10%", "Start dragging, then press X" "Increase the skew value for vertical dividers in a rectangular grid or concentric dividers in a polar grid by 10%", "Start dragging, then press C" "Create and expand a Live Trace object in one step", "Option-click Live Trace in the Control panel, or hold down Option and select a tracing preset." "Increase size of Blob Brush", "] (right square bracket)" "Decrease size of Blob Brush", "[ (left square bracket)" "Constrain Blob Brush path horizontally or vertically", "Shift" "Switch through drawing modes", "Shift+D" "Join two or more paths", "Select the paths, then press Command+J" "Create corner or smooth join", "Select the anchor point, then press Shift+Command+Option+j"
Download CSV